Model 1265B
The Model 1265 Remote Tap Position Kit provides easy retrofit in field (shown with the required 1269 synchro transmitter cable).
Applications
Many Load Tap Changers and Voltage Regulators are factory equipped with Selsyn® synchro transmitters. LTC’s can be easily retrofit with the INCON model 1292KS synchro transmitter.
For those applications where there is no easy way to retrofit a transmitter to the LTC drive mechanism, INCON offers the Model 1265 Transmitter Retrofit Kit.
The 1265 retrofit kit replaces the glass lens on the local indicator dial.
The 1265 is designed for use with the INCON model 1250B Programmable Position Monitor, which displays the LTC position and can transmit a proportional analog signal to remote locations via SCADA.
The Kit comes complete with a Synchro mounted on a clear Lexan Dial. The kit also includes a two-pronged engagement arm that tracks the position of the Dial Indicator needle.
- Several remote 1250B monitors may be driven from the same 1265 transmitter.
- A remote 1250B monitor can be up to 1200 feet away when wired with 16 gauge wire
- With heavier gauge wire this distance can be up to 1 mile
- Fully sealed, weatherproof construction
- Retrofit any existing LTC or V/R in the field
Features
- Provides accurate LTC Position Status to other remote
locations
- Easy to install
- Zero maintenance
- Highly reliable and accurate synchro transmitter is included
- Saves manual reporting time and money
Benefits
- Proven Reliability – many in Utility & Industrial operations for over 20 years
- Maintenance Free
- Can be retrofi ted to older LTC’s with existing synchros
- Easy Installation and Programming
- Flexible Communication Options
Specifications
| GENERAL |
| Power Input: |
115 Volts AC |
| Output Signal: |
0 to 90 VAC |
| Isolation: |
900 volts Rotor to Stators |
| Temperature range: |
- 40 to 158° F (- 40 to 70°
C),
92% humidity (non-condensing) |
| Display type: |
Clear, see through, Lexan dial face |
| Diameters available: |
5.75, 6.25, 7.19, 7.62 or 8.00 inches
(14.6, 15.8, 18.2, 19.3, 20.3 cm) |
Depth to front surface
– with cable off |
4.0 inches (10.2 cm) |
| Other: |
The 1265 does NOT include lightening
/ surge protection. If needed, MOV protection should
be installed in a nearby junction box. |
Ordering Information
| Model 1265-DIA Synchro
Transmitter: |
| Specify Dial Face Diameter: |
| DIA = 5.75, 6.25, 7.19, 7.62 or 8.00 inches |
| Model 1269-L Interface
Cable |
| Select Interface Cable
Length: |
| 1269-10 10 foot (3 m) Interface Cable |
| 1269-20 20 foot (6.1 m)
Interface Cable |
| 1269-50 50 foot (15.2 m) Interface Cable |
PDF Downloads
Datasheet
Application Bulletin